We now grind 0.005 mm out of the cone so that the flatness is 0.023 µ.
This is a BIG Plus SK 50 spindle shaft manufactured for a DIXI boring mill.
When we have mounted the shaft in the bearing system, the maximum deviation on the SK 50 plug gauge will be less than 0.003 mm at 300 mm.
If you love what you do, then everything is possible!
www.spindeldoctor.com
#precision #accuracy #tollerance #bestquality #neverstopexploring #dixi #hauser #metall #notmore #micron #bestwork #metall #turning #grinder #grinding #µ
